Thread: Wobbly skate
View Single Post
Old March 7th, 2020, 08:08 AM   #7
Mort
Sk8 Ninja
 
Join Date: Aug 2012
Location: Huntington Wv
Posts: 3,423
Default

Check axles by taking the trucks off and chucking one side up in a drill then pull the trigger for the slowest forward speed to check them for bent axles.

If your hands are big enough you can hold the wheels in your hands and spin them to check bearing bores. If you feel like there is a high spot between the bearings, that's likely part of it.

Another is set the wheel on the axle and spin it whil holding your finger close to the wheel. Does the gap between the OD of your wheel and your finger change? If so the wheel is likely also out of round.

Edit.

If you relocate the wheel(s) does the problem follow the wheel? I would presume it does.
__________________
Home rink: Roll-A-Rama in Huntington Wv.
"Focus on form and speed is a byproduct, focus on speed and falling is a byproduct." - Matguy

Last edited by Mort; March 7th, 2020 at 03:15 PM.
Mort is offline   Reply With Quote