S k a t e L o g     F o r u m

Closed in June of 2020

SKATELOG DOT COM: Web Site | Blog | Facebook |    


Home

*** The SkateLog Forum Has Been Replaced by SkateDebate Dot Com ***

FROM SKATELOG FORUM HOST KATHIE FRY IN MARCH OF 2020:
This announcement is to let everyone know that after hosting the SkateLog Forum and its predecessors for nearly 20 years, I have decided it is time to permanently turn the forum over to a new owner and administrator. I cannot think of anyone more suitable to take on that role than my SkateLog forum co-host, Florida skater Jessica Wright. I am pleased to announce that Jessica has agreed to establish and host a brand new skating forum, configured like the SkateLog Forum, but with a new name and a new Web Site. This new forum is 100% owned and operated by Jessica.

NEW FORUM NAME: SkateDebate Forum
NEW WEB SITE: SkateDebate.com
NEW OWNER AND ADMINISTRATOR: Jessica Wright
REGISTER IN JESSICA'S FORUM: Create a SkateDebate Forum User Name


Go Back   SkateLog Forum > Special Interest Skating Forums (sorted by number of posts) > Ask DocSk8 (Expert Indoor Skate Building Advice)
FAQ Calendar Search Today's Posts Mark Forums Read

Ask DocSk8 (Expert Indoor Skate Building Advice) This forum is different then the other SkateLog forums in that it is not a discussion forum, but rather a place you can ask skate building expert Fred "DocSk8" Benjamin about building and repairing indoor speed, derby, and jamskate quad roller skates. Please start a new thread for each new question.

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old April 12th, 2014, 03:11 PM   #1
Mort
Sk8 Ninja
 
Join Date: Aug 2012
Location: Huntington Wv
Posts: 3,423
Default bearings(inner race comparisons)

I'm looking for a bearing with the thickest inner race possible. No machined lips on the inner races if you will. This will be for a fixed bearing and spacer assembly, as such I'm looking for the strongest thickest innner race possible.

I recently was going to MOD my RBT's but chose not to because I didn't have a set of bearings I wanted to use.

Qube juices are out and probably their entire line because of the way the inner races are machined for their seals. I am highly interested in the qube 8balls. Since they use smaller balls which would leave a little more material on the inner race. Though I don't want to buy a set of bearings just to find it was a waste of time. It would be nice if they didn't machine their inner races and just used a better seal.


Since I know you handle tons of the little buggars you may very well be the best guy to ask.

Other canidates are bones line as they seem to have a inner raceway that isnt cut into.
__________________
Home rink: Roll-A-Rama in Huntington Wv.
"Focus on form and speed is a byproduct, focus on speed and falling is a byproduct." - Matguy
Mort is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 07:45 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.