Wheel repair?

Stroopwafel · June 16th, 2017, 09:47 PM

Picked up some trash tonight

A screw got stuck in a wheel all the way to the hub. The head was still out and made light scratches in the other wheels, big ones in the the frame and almost through the carbon bottom of the boot in just a matter of seconds...

My question is what to do with the wheel. Just ride on it and see what happens? Or is it possible to repair such a hole in a way? It's a Bont Mayhem 85a. And though it looks yellow and used in the picture it still is a nice set of wheels. Thanks in advance

spdkls · June 17th, 2017, 12:10 PM

Time to get a new set! no ability for repair. Too many variables for further damage.

chuckboucher · June 17th, 2017, 02:01 PM

How the heck did that happen? Especially when a wheel doesn't have much time to spin before the screw would pass by one of the other wheels. Is this a 3 wheel or 4 wheel frame (that would explain it)?

As for the wheel, either put it on the mantle or throw it away. It's done. Don't risk your safety to save money.

Stroopwafel · June 17th, 2017, 02:35 PM

Thanks. Being a cheapskate / Dutch it's hard! But I will bin the wheels.

It's a 4 wheel frame and it happened to the second wheel. Maybe the first wheel flipped the screw up. There was a lot of sound and it slowed me down considerable. But being part of a Friday night skate I could not stop in the middle of the road so it took me about 5 meter to find a safe spot. That makes 15 rotations. My young daughter was with me (proud dad) so I have been trying all night to avoid the dirty and rough sections of road. Guess even skaters can have a flat

chuckboucher · June 17th, 2017, 03:17 PM

You're lucky that it didn't stop you dead in your tracks.

kentek · June 20th, 2017, 01:23 PM

...Screwed!

Stroopwafel · June 20th, 2017, 02:34 PM

And my fairy, Mrs Mijnten, has solved it with some (red) magic!

fierocious1 · June 21st, 2017, 12:20 AM

Just goes to show things can get screwed up in the Netherlands too....

Stroopwafel · June 21st, 2017, 09:43 AM

Yup, even in the Netherlands. I've also had three "screwed" flats with my car in about ten years. They should make screws way more expensive!
https://www.youtube.com/watch?v=VZrFVtmRXrw

And on the record, I just made my first trip on the Red Magic's. I love them

At the shop they told me to take the xfirm instead of firm. I used to be very happy with Mayhem's in 85a and 87a. The 85a are great on rough road. The Magic's xfirm feel to me not as good on rough but definitely not bad. And overall they just feel excellent.

June 16th, 2017, 09:47 PM	#1
Stroopwafel Junior Member Join Date: Nov 2016 Location: Utrecht, The Netherlands Posts: 15	Wheel repair? Picked up some trash tonight A screw got stuck in a wheel all the way to the hub. The head was still out and made light scratches in the other wheels, big ones in the the frame and almost through the carbon bottom of the boot in just a matter of seconds... My question is what to do with the wheel. Just ride on it and see what happens? Or is it possible to repair such a hole in a way? It's a Bont Mayhem 85a. And though it looks yellow and used in the picture it still is a nice set of wheels. Thanks in advance

June 17th, 2017, 02:01 PM	#3
chuckboucher is skating again. WOOT! Join Date: Aug 2006 Location: South Central, MA Posts: 2,783	How the heck did that happen? Especially when a wheel doesn't have much time to spin before the screw would pass by one of the other wheels. Is this a 3 wheel or 4 wheel frame (that would explain it)? As for the wheel, either put it on the mantle or throw it away. It's done. Don't risk your safety to save money. __________________ Inline: Simmons Full Custom(2) \| LSR Vanquish 4x110mm/EO 3x125mm \| TLTF/Matter/Atom \| Acer Ceramic/Bones Swiss Outdoor Quad: Bont Carbon Hybrid \| Snyder Advantage \| Atom Road Hog \| Bones Swiss Indoor Quad: Reidell 911 \| Roll-Line Mistral \| Corey Super Enforcers \| Bones Swiss

June 17th, 2017, 03:17 PM	#5
chuckboucher is skating again. WOOT! Join Date: Aug 2006 Location: South Central, MA Posts: 2,783	You're lucky that it didn't stop you dead in your tracks. __________________ Inline: Simmons Full Custom(2) \| LSR Vanquish 4x110mm/EO 3x125mm \| TLTF/Matter/Atom \| Acer Ceramic/Bones Swiss Outdoor Quad: Bont Carbon Hybrid \| Snyder Advantage \| Atom Road Hog \| Bones Swiss Indoor Quad: Reidell 911 \| Roll-Line Mistral \| Corey Super Enforcers \| Bones Swiss

June 20th, 2017, 01:23 PM	#6
kentek Senior Member Join Date: Jun 2007 Posts: 414	You Are ...Screwed!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

	S k a t e L o g F o r u m Inline Skating and Quad Roller Skating Forum Hosts: Jessica Wright \| Kathie Fry	FOLLOW US: Our Blog \| Facebook \| Twitter \| Email

June 17th, 2017, 12:10 PM	#2
spdkls Senior Member Join Date: Dec 2008 Posts: 193	Time to get a new set! no ability for repair. Too many variables for further damage.

June 17th, 2017, 02:35 PM	#4
Stroopwafel Junior Member Join Date: Nov 2016 Location: Utrecht, The Netherlands Posts: 15	Thanks. Being a cheapskate / Dutch it's hard! But I will bin the wheels. It's a 4 wheel frame and it happened to the second wheel. Maybe the first wheel flipped the screw up. There was a lot of sound and it slowed me down considerable. But being part of a Friday night skate I could not stop in the middle of the road so it took me about 5 meter to find a safe spot. That makes 15 rotations. My young daughter was with me (proud dad) so I have been trying all night to avoid the dirty and rough sections of road. Guess even skaters can have a flat

June 20th, 2017, 02:34 PM	#7
Stroopwafel Junior Member Join Date: Nov 2016 Location: Utrecht, The Netherlands Posts: 15	And my fairy, Mrs Mijnten, has solved it with some (red) magic!

June 21st, 2017, 12:20 AM	#8
fierocious1 Senior Member Join Date: Apr 2010 Location: Texas Posts: 4,908	Just goes to show things can get screwed up in the Netherlands too....

June 21st, 2017, 09:43 AM	#9
Stroopwafel Junior Member Join Date: Nov 2016 Location: Utrecht, The Netherlands Posts: 15	Yup, even in the Netherlands. I've also had three "screwed" flats with my car in about ten years. They should make screws way more expensive! https://www.youtube.com/watch?v=VZrFVtmRXrw And on the record, I just made my first trip on the Red Magic's. I love them At the shop they told me to take the xfirm instead of firm. I used to be very happy with Mayhem's in 85a and 87a. The 85a are great on rough road. The Magic's xfirm feel to me not as good on rough but definitely not bad. And overall they just feel excellent.