S k a t e L o g     F o r u m

Closed in June of 2020

SKATELOG DOT COM: Web Site | Blog | Facebook |    


Home

*** The SkateLog Forum Has Been Replaced by SkateDebate Dot Com ***

FROM SKATELOG FORUM HOST KATHIE FRY IN MARCH OF 2020:
This announcement is to let everyone know that after hosting the SkateLog Forum and its predecessors for nearly 20 years, I have decided it is time to permanently turn the forum over to a new owner and administrator. I cannot think of anyone more suitable to take on that role than my SkateLog forum co-host, Florida skater Jessica Wright. I am pleased to announce that Jessica has agreed to establish and host a brand new skating forum, configured like the SkateLog Forum, but with a new name and a new Web Site. This new forum is 100% owned and operated by Jessica.

NEW FORUM NAME: SkateDebate Forum
NEW WEB SITE: SkateDebate.com
NEW OWNER AND ADMINISTRATOR: Jessica Wright
REGISTER IN JESSICA'S FORUM: Create a SkateDebate Forum User Name


Go Back   SkateLog Forum > Special Interest Skating Forums (sorted by number of posts) > Ask DocSk8 (Expert Indoor Skate Building Advice)
FAQ Calendar Search Today's Posts Mark Forums Read

Ask DocSk8 (Expert Indoor Skate Building Advice) This forum is different then the other SkateLog forums in that it is not a discussion forum, but rather a place you can ask skate building expert Fred "DocSk8" Benjamin about building and repairing indoor speed, derby, and jamskate quad roller skates. Please start a new thread for each new question.

Reply
 
Thread Tools Display Modes
Old January 10th, 2017, 12:57 PM   #1
HIWATT
Member
 
Join Date: Apr 2008
Location: TN
Posts: 25
Default Tee nut height for bont boots

What height and what thread pitch tee-nuts do you recommend for use with Bont boots?

I am mounting a set of Bont Infinity plates on a Bont hybrid Carbon and figured you would be the best to ask.
HIWATT is offline   Reply With Quote
Old January 10th, 2017, 04:07 PM   #2
Doc Sk8
Yankee Catfish
 
Doc Sk8's Avatar
 
Join Date: Oct 2007
Location: Big hill on Mars
Posts: 12,146
Default Recommend??

I use... I clip or smash the teeth for the front and leave them for the rear. NOTE: You will need to counter bore the front mount holes because these will come through the boot. If you do not counter bore the holes the plate will never be tight up front. I counter bore the plates on every carbon Bont boot I mount.

The Infinity will need some relief cutting for the flat washers on the rear mount holes as they center of the plate interferes with the mounting space.

__________________
"The difference between good skates and great skates comes from knowing where to get the numbers."
Doc Sk8 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 01:37 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.