What threads do my sk8s have?? - Page 2

Doc Sk8 · March 30th, 2012, 01:40 PM

Quote:

Originally Posted by sommemi

Q: is there a reason that the threads on the newer laser plates are tighter than the old plates? Both me and another skater have had trouble getting our 5/8 toe stops to easily screw into the nose of our newer plates. (or even vice versa? just seems the toe stops on lasers are harder to screw in than on other makes.)

Are you comparing the difference between the old style plastic nose Lasers vs the new ones or The Hard Nose with the metal insert vs the new ones??

And how many times have stops been removed from the old ones or are you going by memory..

Pod · April 14th, 2012, 02:41 AM

my Arena Stars (aussie made plate) have an m10 x 1.25 kingpin thread

Doc Sk8 · April 14th, 2012, 04:34 AM

Quote:

Originally Posted by Pod

my Arena Stars (aussie made plate) have an m10 x 1.25 kingpin thread

Got pix?? That plate does not ring a bell.

Pod · April 21st, 2012, 11:17 AM

here you go Doc ,i have 2 sets one set has 145mm wheelbase ,and the ones i skate 160mm

notice the small kingpin head ,the top cushion originally was conical like on my skating pair

both size plates ,on these i have replaced the kingpin bolt with a high tensile bolt which i have turned half the thickness off the head

my skates

HK47 · April 21st, 2012, 01:24 PM

That reminds me, Flyer 5s - M10 kingpins.

Anyone know where I could get some M10 inverted kingpins for them? (I have some rod stock, was gonna cut that up and have a bash at case hardenning them, but thats gonna be a lot of work!)

Doc Sk8 · April 21st, 2012, 06:20 PM

Quote:

Originally Posted by HK47

That reminds me, Flyer 5s - M10 kingpins.

Anyone know where I could get some M10 inverted kingpins for them? (I have some rod stock, was gonna cut that up and have a bash at case hardenning them, but thats gonna be a lot of work!)

M10 x what?? Makes a difference..

Doc Sk8 · April 21st, 2012, 06:22 PM

Quote:

Originally Posted by Pod

my skates

Looks good to me.. You might want to put those over in the quad forum if you have not already done so..

Xylish · August 22nd, 2012, 02:09 PM

Just got a bare Sure Grip Junior Pro plate for one of my little ones and the Kingpins and toe stop bolts are different to full size plates. Any idea on these?

HK47 · August 22nd, 2012, 03:05 PM

Quote:

Originally Posted by Doc Sk8

M10 x what?? Makes a difference..

Sorry, only just saw this! Just regular M10, so 1.5mm thread pitch ... I'm just gonna leave them as SA now, though

gotsk8s · April 18th, 2013, 01:52 AM

What was/is the KP size and thread on those?

Doc Sk8 · April 18th, 2013, 03:51 AM

3/8 x 16 UNC. Added to the list. All my Rockets (I have 2 NTS Rockets I sk8.) have Snyder reverse king pins..

gotsk8s · April 19th, 2013, 12:36 AM

Quote:

Originally Posted by Doc Sk8

3/8 x 16 UNC. Added to the list. All my Rockets (I have 2 NTS Rockets I sk8.) have Snyder reverse king pins..

Thats what I was hoping to read. Thanks.

rhetttro · September 19th, 2013, 12:10 AM

I love this thread. every time I get some hair brained scheme going, I know I just need to pop onto this thread and my questions are quickly answered. However, I found a container of studs from days gone by that I want to use and they have the same thread pitch as a Hard Candy king pin.

Do you know what these studs would be?

Thanks

Doc Sk8 · September 19th, 2013, 05:00 AM

Quote:

Originally Posted by rhetttro

I love this thread. every time I get some hair brained scheme going, I know I just need to pop onto this thread and my questions are quickly answered. However, I found a container of studs from days gone by that I want to use and they have the same thread pitch as a Hard Candy king pin.

Do you know what these studs would be?

Thanks

If they are the same thread as the HC it is a 3/8 x 24, same as the Probe and the new Royal on the nut end.. However, the only plate I am aware of that has a 3/8 x 24 in the plate end was some of the old Snyder Dance plates. That presents a problem since I believe those used a Snyder style, Allen head, bolt king pin with a 3/8 x 24 on the plate end...

Looks like ya got me stumped at the moment.. Sorry.

rhetttro · October 23rd, 2013, 06:18 PM

Quote:

Originally Posted by Doc Sk8

[B]If they are the same thread as the HC it is a 3/8 x 24, same as the Probe and the new Royal on the nut end..

Just what i needed, Thanks!

Do you know the thread pitch for the Pilot Falcon plate's toe stop set screw?

I just received a set from RCSports with the pivot inserts & toe stop set screws pilfered from the box and I'm trying to find a replacement.
Thanks again!

Doc Sk8 · October 23rd, 2013, 08:08 PM

Quote:

Originally Posted by rhetttro

Just what i needed, Thanks!

Do you know the thread pitch for the Pilot Falcon plate's toe stop set screw?

I just received a set from RCSports with the pivot inserts & toe stop set screws pilfered from the box and I'm trying to find a replacement.
Thanks again!

I'll have to check. I have a couple of pair here. If I don't get back to ya, send me a PM and bug me. I'm swamped.

Doc Sk8 · January 8th, 2014, 02:09 PM

First generation Snyder click action king pin from a dance / figure plate. 3/8 x 24 on both ends.

Jazzy · June 2nd, 2015, 12:47 PM

I lost one of the nuts off the mounting bolts for my Roll-Line killers. I used the mounting hardware that came with the plates. Do you know what the threads are? I need to pick up a few extra nuts.

Doc Sk8 · June 2nd, 2015, 09:43 PM

All of the Roll Line mounting hardware I have is 4mm x 0.7.

chuckboucher · June 18th, 2016, 05:13 PM

So I take it that Snyder axles fall into the US 7mm axle category, as they are a Sure Grip company?

April 21st, 2012, 01:24 PM	#25
HK47 Roll Player Join Date: Aug 2010 Location: Somewhere near London Posts: 4,311	That reminds me, Flyer 5s - M10 kingpins. Anyone know where I could get some M10 inverted kingpins for them? (I have some rod stock, was gonna cut that up and have a bash at case hardenning them, but thats gonna be a lot of work!) __________________ "You guys better git some HEAD TRANSPLANTS QUICK! " ~ Okie

August 22nd, 2012, 02:09 PM	#28
Xylish Senior Member Join Date: Jun 2012 Location: Melbourne, Australia Posts: 188	SG Jr Pro Just got a bare Sure Grip Junior Pro plate for one of my little ones and the Kingpins and toe stop bolts are different to full size plates. Any idea on these?

April 18th, 2013, 01:52 AM	#30
gotsk8s I bet Godsk8s too! Join Date: Aug 2006 Location: Madison, Florida Posts: 5,721	Rannalli Rocket What was/is the KP size and thread on those? __________________ Genesis 12:2-3 "My neighbors listen to good music whether they like it or not"

April 18th, 2013, 03:51 AM	#31
Doc Sk8 Yankee Catfish Join Date: Oct 2007 Location: Big hill on Mars Posts: 12,014	Rannalli Rockets. 3/8 x 16 UNC. Added to the list. All my Rockets (I have 2 NTS Rockets I sk8.) have Snyder reverse king pins.. __________________ If you are willing to compromise on results, by all means, compromise on equipment. If you think you can get by, you most likely will...Just get by.

September 19th, 2013, 12:10 AM	#33
rhetttro Owner, Pop's Skateland Join Date: Mar 2008 Location: Bowie, TX Posts: 718	Hard Candy I love this thread. every time I get some hair brained scheme going, I know I just need to pop onto this thread and my questions are quickly answered. However, I found a container of studs from days gone by that I want to use and they have the same thread pitch as a Hard Candy king pin. Do you know what these studs would be? Thanks __________________ 2015 Senior Bronze National Champion

	S k a t e L o g F o r u m Inline Skating and Quad Roller Skating Forum Hosts: Jessica Wright \| Kathie Fry	FOLLOW US: Our Blog \| Facebook \| Twitter \| Email

April 14th, 2012, 02:41 AM	#22
Pod just another aussie Join Date: Feb 2012 Location: Sydney Australia Posts: 47	my Arena Stars (aussie made plate) have an m10 x 1.25 kingpin thread

April 21st, 2012, 11:17 AM	#24
Pod just another aussie Join Date: Feb 2012 Location: Sydney Australia Posts: 47	here you go Doc ,i have 2 sets one set has 145mm wheelbase ,and the ones i skate 160mm notice the small kingpin head ,the top cushion originally was conical like on my skating pair both size plates ,on these i have replaced the kingpin bolt with a high tensile bolt which i have turned half the thickness off the head my skates

January 8th, 2014, 02:09 PM	#37
Doc Sk8 Yankee Catfish Join Date: Oct 2007 Location: Big hill on Mars Posts: 12,014	Update on rhetttro's 3/8 x 24 king pin. First generation Snyder click action king pin from a dance / figure plate. 3/8 x 24 on both ends. __________________ If you are willing to compromise on results, by all means, compromise on equipment. If you think you can get by, you most likely will...Just get by.

June 2nd, 2015, 12:47 PM	#38
Jazzy Member Join Date: Oct 2011 Location: Atlanta, GA Posts: 89	I lost one of the nuts off the mounting bolts for my Roll-Line killers. I used the mounting hardware that came with the plates. Do you know what the threads are? I need to pick up a few extra nuts. __________________ Wikko Skates Custom, Roll-Line Killer, Rollerbones Turbos 97A Bont Hybrid Carbon, Avenger Mg, Rollerbones Turbos 97A/88A, Qube 8-ball

June 2nd, 2015, 09:43 PM	#39
Doc Sk8 Yankee Catfish Join Date: Oct 2007 Location: Big hill on Mars Posts: 12,014	All of the Roll Line mounting hardware I have is 4mm x 0.7. __________________ If you are willing to compromise on results, by all means, compromise on equipment. If you think you can get by, you most likely will...Just get by.

June 18th, 2016, 05:13 PM	#40
chuckboucher is skating again. WOOT! Join Date: Aug 2006 Location: South Central, MA Posts: 2,750	So I take it that Snyder axles fall into the US 7mm axle category, as they are a Sure Grip company? __________________ Inline: Simmons Full Custom(2) \| EO 4x110mm/EO 3x125mm \| TLTF/MPC/Atom \| Acer Ceramic/Bones Swiss Outdoor Quad: Bont Carbon Hybrid \| Snyder Advantage \| Atom Road Hog \| Bones Swiss Indoor Quad: Reidell 911 \| Roll-Line Mistral \| Corey Super Enforcers \| Bones Swiss

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode