S k a t e L o g     F o r u m
Inline Skating and Quad Roller Skating
Forum Hosts: Jessica Wright | Kathie Fry

FOLLOW US: Our Blog | Facebook | Twitter | Email    


Home - Forum Index - Africa Skating - Asia Skating - Europe Skating - Oceania Skating - Pan America Skating - Roller_Rinks - Friend the SkateLog Forum in Facebook - SkateLog Forum on Facebook

Forum Administrators: Jessica Wright and Kathie Fry | Email Us
Access code for buying and selling subforums: "skates"
How To Get a User Account and Posting Privileges in the SkateLog Forum
Use Google to Search the SkateLog Forum

Go Back   SkateLog Forum > Special Interest Skating Forums (sorted by number of posts) > Ask DocSk8 (Expert Indoor Skate Building Advice)
FAQ Calendar Search Today's Posts Mark Forums Read

Ask DocSk8 (Expert Indoor Skate Building Advice) This forum is different then the other SkateLog forums in that it is not a discussion forum, but rather a place you can ask skate building expert Fred "DocSk8" Benjamin about building and repairing indoor speed, derby, and jamskate quad roller skates. Please start a new thread for each new question.

Reply
 
Thread Tools Display Modes
Old August 25th, 2015, 10:14 AM   #1
wolfsbane902
Member
 
Join Date: Jun 2012
Location: Singapore
Posts: 42
Default Bearing removal and cleaning for Rollerblade Fusion x5

Hi all,

Need some help removing the bearings from the wheels. And then, to degrease and re-grease the bearings.

There is now a pretty loud whirring sound (started only a couple skate runs ago) when I go in my inline skates, not sure why. But I suspect it is because the lubricant in my bearings have run dry, so I dare not use my skates for now...

Does anyone have any idea how to remove the bearings from the wheels? And how to remove the shields and what kind of lubricant (oil or cream)?

I have no problems removing the bearings and opening the C shields for my K2s, but this Rollerblade Fusion x5 is another whole ballpark altogether.

appreciate some help! I've tried all ways and means and still they are stubbornly stuck in the wheels.

my K2s:


K2s degunked vs gunked:


a few internet articles told me to use this to grease up:


the Singer sewing machine oil on the K2 bearings do not seem to spin well and long...the oil leaks out. So this seems that a cream lubricant would work better as the oil would seep out?

my Rollerblade Fusion x5s, no idea how the inside looks:
wolfsbane902 is offline   Reply With Quote
Old August 26th, 2015, 06:43 PM   #2
Doc Sk8
Yankee Catfish
 
Doc Sk8's Avatar
 
Join Date: Oct 2007
Location: Big hill on Mars
Posts: 12,104
Default

The bearing should just pry out. I have never run into a major brand inline wheel / bearing that was different than the 2 you show. The bearings in the Rollerblade looks to have non serviceable shields. So get a 5/16" (8mm) bolt about 3" (~80mm) long and and insert it into the inner race, just deep enough to engage the bearing but not the spacer in the middle. The gently pry the bearing, twisting it to the side. Should pop out. The flip the wheel and dump out the spacer. Then push out the other bearing.

If the bearings are open on one side, clean as usual. If not pry out one of the shields. This will destroy the shield, but you only need one. Just remember to put the open side of the bearing into the wheel toward the spacer.

Lite oil is fine for bearings but just remember grease will last longer and minimize dirt intrusion. It makes the difference between cleaning them a lot and cleaning them less often.

__________________
"The difference between good skates and great skates comes from knowing where to get the numbers."
Doc Sk8 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 02:38 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.